化学微发泡成型外观表面技术研究

从汽车内饰轻量化方向考虑,研究了化学微发泡技术,从成核和气泡长大阶段进行研究,通过特殊的柔性后退core-back工艺,在充模过程中控制气泡的变形和破裂以保证成型制品的表面质量,实现化学微发泡成型制品无外观缺陷、质量减轻20%以上的目的。     

Electrowetting-Assisted Generation of Ultrastable High Charge Densities in Composite Silicon Oxide–Fluoropolymer Electret Samples for Electric Nanogenerators

Electric nanogenerators that directly convert the energy of moving drops into electrical signals require hydrophobic substrates with a high density of static electric charge that is stable in “harsh environments” created by continued exposure to potentially saline water. The recently proposed charge-trapping electric generators (CTEGs) that rely on stacked inorganic oxide–fluoropolymer (FP) composite electrets charged by homogeneous electrowetting-assisted charge injection (h-EWCI) seem to solve both problems, yet the reasons for this success have remained elusive. Here, systematic measurements at variable oxide and FP thickness, charging voltage, and charging time and thermal annealing up to 230 °C are reported, leading to a consistent model of the charging process. It is found to be controlled by an energy barrier at the water-FP interface, followed by trapping at the FP-oxide interface. Protection by the FP layer prevents charge densities up to −1.7 mC m⁻² from degrading and the dielectric strength of SiO₂ enables charge decay times up to 48 h at 230 °C, suggesting lifetimes against thermally activated discharging of thousands of years at room temperature. Combining high dielectric strength oxides and weaker FP top coatings with electrically controlled charging provides a new paradigm for developing ultrastable electrets for applications in energy harvesting and beyond.     

Growth and characterization of Ag–Al2O3 composites thin films for thermoelectric power generation applications

Thin films of Ag–Al₂O₃ composites were successfully grown on Si substrate by thermal evaporation method and their thermoelectric performance was modulated using post growth annealing technique. Pellet of Ag and Al mixture having 1:4 ratio was evaporated on Si substrate using the vacuum tube furnace. As grown sample was cut into pieces and post-growth annealing was performed at different temperatures using muffle furnace. XRD results suggested that as-deposited sample has amorphous nature, but crystallinity of the samples increase as an annealing temperature increase from 600 to 900^oC. This structural behavior of annealed samples was further verified by Raman spectroscopy measurements. We have reported an optimal annealing temperature (800 ⁰C) for the best thermoelectric performance of investigated composites. At this specific annealing temperature, charge carriers are highly mobile which resulted in the enhancement of thermoelectric power generation performance of Ag–Al₂O₃ composite. The value of power factor (1.38x10^?2 W/m-K^?2) reported in the current study is the highest value for Ag–Al₂O₃ composites so for reported in the literature according to the best of our knowledge.     

TRIZ创新方法剖析路面渗水仪底座和路面的密封性能

针对路面渗水仪底座和路面的密封性能不良问题，运用TRIZ创新方法的因果链、技术矛盾、物理矛盾、进化分析等工具找到原因，获得解决方案。通过调研及试用，不断优化及调整所选方案，达到最优解决效果。应用效果证明TRIZ理论有助于创新并快速解决工程实际问题。     

Effects of andalusite and kyanite addition on the microstructure,thermo-mechanical properties and corrosion resistance of ultralow-cement bauxite-corundum castables

Ultralow-cement bauxite-corundum refractory castables are increasingly attracting attention because of the advantages in performance and cost. To improve its volume stability and high-temperature performance, andalusite and kyanite were incorporated into this type of refractory, respectively, and a comparative investigation of their effects on microstructure, thermo-mechanical properties, and slag corrosion resistance was carried out in this work. The expansion effects induced by the mullitization of these additives not only suppressed the sintering shrinkage but also made the matrix structure more compact and uniform, mainly owing to the generation of many new and strong mullite bonds. This improvement resulted in a significant increase in the refractoriness under load and creep resistance. This effect was far more pronounced for the andalusite-added castables, for which the RUL increased by 62 °C and the creep rate at the stationary stage decreased by 26%. Besides, adverse effects on microstructure and properties appeared when adding a higher amount of kyanite due to the excessive expansion. Moreover, the corrosion mechanisms of these refractory castables by refining slag were discussed, and the active role of andalusite addition in the corrosion resistance was also proposed.     

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage

At present, several composite insulation systems were proposed that can be used for passive insulation systems, including foam-variable density multilayer insulation (VDMLI), aerogel-VDMLI and hollow glass microspheres (HGMs)-VDMLI. The passive insulation systems with different inner material (IM) showed different performances. However, the relationship between the average thermal conductivity of IM and the insulation performance of the whole system has rarely been investigated. It is of great significance for efficient configuration and matching of the passive insulation system. In this paper, a series of average thermal conductivity of IM were assumed to predict the insulation performance of the whole system at 20 K–300 K and high vacuum. In order to further illustrate the relationship between IM and MLI/VDMLI, the foam was replaced by the HGMs as 5 mm a unit forming a series of HGMs-foam-MLI/VDMLI insulation systems. The performance of the systems was investigated. After the foam was completely replaced by the HGMs, the performance of MLI and VDMLI systems was improved 33% and 13%, respectively. Moreover, each mode of heat transfer including solid conduction, radiation, and gas conduction for foam-MLI/VDMLI and HGMs-MLI/VDMLI insulation systems were calculated and analyzed.     

UPLC法同时测定阿托伐他汀钙中15个杂质含量

目的建立超高效液相色谱法(UPLC)同时测定阿托伐他汀钙原料药中15个杂质含量的方法。方法采用岛津Shim-pack Velox PFPP(2.1 mm×100 mm,1.8μm)色谱柱,以3.9 g/L醋酸铵缓冲液(pH 5.0):乙腈:甲醇:四氢呋喃(无稳定剂)=67:21:6:6为流动相A,3.9 g/L醋酸铵缓冲液(pH 5.0):乙腈:甲醇:四氢呋喃(无稳定剂)=27:61:6:6为流动相B;梯度洗脱,流速0.43 ml/min,检测波长244 nm,柱温35℃,样品室温度10℃;进样量1.8μl。结果阿托伐他汀钙及各杂质峰间分离良好,在0.3~3μg/ml范围内15个杂质均呈良好的线性关系(r均>0.999,n=6),各杂质平均回收率分别为96.3%,99.1%,99.9%,102.4%,96.4%,99.8%,99.4%,104.9%,106.4%,105.4%,100.1%,98.9%,94.7%,94.4%,101.4%,且不同浓度间平行性良好。15个杂质重复性、进样精密度、中间精密度均良好,48 h内均较稳定。此法除对色谱柱要求较高外,耐用性良好。结论本方法简便、快速、分离度好、专属性强,经方法学验证可用于阿托伐他汀钙原料药杂质质量控制。     

平行流式电机周向水套结构参数对散热性能影响研究

针对电力机车上某功率密度为1.27 kW/kg的平行流式电机周向水套结构的散热问题进行了研究。首先利用热阻网络法建立了平行流多通道截面的热阻数学模型;然后借助FLUENT软件对水套的电机散热过程进行了数值模拟,并对结构参数进行了优化;最后通过实验验证了计算的正确性。结果表明:当通道孔数n增大时,总热阻普遍减小;当通道单孔宽度x增大时,总热阻先增大后减小,当n=6个、x=1.670 mm时,水套具有最佳的散热性能;水套各测温点的数值模拟温度与实验测量温度之间的相对误差均低于5.00%。     

Changes in physicochemical properties and myofibrillar protein properties in grass carp salted by brining and injection

The aim of this study was to investigate the changes in physicochemical properties and myofibrillar protein properties of grass carp meat during brining and brine injection at 4 °C. The time reached equilibrium was 7 h in brining group and 5 h by injection, where the salt content was about 1.76%. The water content, water holding capacity and yield in injection group (86.59%, 9.18% and 110%, respectively) were higher than brining group (84.76%, 11.47%, and 108%, respectively) at equilibrium point significantly (P < 0.05). This was attributed to the more swollen filament lattices and disordered protein structure in injection group (P < 0.05). The myofibrillar protein structure was compared, including sulphydryl content, surface hydrophobicity, solubility, sodium dodecyl sulphate polyacrylamide gel electrophoresis pattern and secondary structure. The injection group presented the better quality of salted fish meat in shorter time.     

Research on the hydrogen injection strategy of a direct injection natural gas/hydrogen rotary engine considering apex seal leakage

The purpose of the present paper is to investigate the hydrogen injection strategy on the combustion performance of a natural gas/hydrogen rotary engine. Considering that apex seal leakage (ASL) is an inevitable problem in the actual working process of a rotary engine, the action of ASL cannot be ignored for an in-depth study of its combustion performance. Therefore, in this paper, a 3D dynamic simulation model that put the effect of ASL into consideration was established. Furthermore, based on the established 3D model, the combustion process of a natural gas/hydrogen rotary engine under various hydrogen injection angle (HIA) and hydrogen injection timing (HIT) was investigated. The results indicated that the hydrogen jet flow first impacted on the rotor wall after entering the cylinder, and then diffused under the action of the vortexes in the cylinder. Therefore, the HIA and HIT could change the hydrogen distribution by changing the hydrogen impact location and the intensities of the vortexes in the cylinder. In addition, the ideal hydrogen distribution at the ignition timing which could improve the combustion efficiency was given. That is, under the premise of ensuring minimized hydrogen leakage, the hydrogen should mainly distribute in the middle and the front of the cylinder, and a high hydrogen concentration is maintained near the spark plug.